Extreme Networks 10GB-AC10-SFPP Compatible 10G SFP+ Active Copper Twinax Cable, 10m (33ft)

For data-center links that specify Extreme Networks 10GB-AC10-SFPP, this 10m (33ft) ACC assembly delivers 10G connectivity through SFP+ to SFP+. It removes separate module-and-patch-cord interfaces while retaining clear mechanical, power and compatibility details for high-density design and installation planning.

OEM Part Number: 10GB-AC10-SFPPHT Part Number: 10GB-AC10-SFPP

Product Highlights

Compatible alternative to Extreme Networks 10GB-AC10-SFPP
10G connectivity at 10Gbps
Interface configuration: SFP+ to SFP+
Fixed length and part number: 10m (33ft), 10GB-AC10-SFPP
Cable construction: Active Twinax
Conductor specification: 26AWG
Maximum power consumption: ≤0.5W
Minimum bend radius: 30mm

Specifications

HT Part Number	10GB-AC10-SFPP
Extreme Networks Compatible	10GB-AC10-SFPP
Manufacturer	HT
Connector Type	SFP+ to SFP+
Max Data Rate	10Gbps
Minimum Bend Radius	30mm
Wire AWG	26AWG
Cable Length	10m (32.81ft)
Jacket Material	PVC (OFNR)
Cable Type	Active Twinax
Temperature	0 to 70°C (32 to 158°F)
Power Consumption	≤0.5W
Power Supply	3.3V
Protocols	1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel

Power and Thermal Planning

The rated power consumption is ≤0.5W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

Cable Construction and Routing

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

Network and Protocol Considerations

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

Length Selection and Installation Planning

Choose 10GB-AC10-SFPP when the measured managed path justifies 10m (33ft), not simply to leave a large spare coil. Additional reach can simplify adjacent-rack routing, yet unused cable still needs bend-safe storage and ventilation clearance. Keep identification visible so this extended version is not confused with shorter spares. The next shorter verified assembly is 10GB-AC07-SFPP at 7m (23ft), which is the better comparison when the managed route leaves substantial unused cable.

Position Within the Length Range

10GB-AC10-SFPP is the longest of 5 verified length options in this family. Compared with 10GB-AC07-SFPP at 7m (23ft), it provides 3m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

Data-Center Design and Airflow

Select the assembly by both reach and rack layout. A direct connection removes separate module-and-patch-cord interfaces, but it still needs a bend-safe pathway and clear connector access. Keep cable bundles from blocking front-panel airflow, account for the listed interface power where applicable and choose a length that supports maintenance without leaving an unmanaged coil. For this assembly, the listed conductor specification is 26AWG; the minimum bend radius is 30mm; the stated power consumption is ≤0.5W; the jacket material is PVC (OFNR).

Quality Assurance and Packaging

Each cable receives connector inspection and a functional link check before it is coiled with bend-safe slack and packed. Protective materials shield the connector housings during transport. Rack or project labels are available to keep length, part number and installation destination aligned. Standard protective packing is used by default, with project documentation arranged when requested.

Ordering Information

Provide the OEM reference, HT part number, fixed length and quantity, together with the intended host interfaces. Rack-based quantities and packaging instructions can be included for larger deployments. Other lengths are separate products and should be entered on their own order lines. Quantity and any labeling instructions should be attached specifically to 10GB-AC10-SFPP.

Extreme Networks Compatibility and Factory Testing

Compatibility confirmation combines host identification with actual link establishment and diagnostic checks. The assembly is prepared for the stated OEM reference rather than selected only by connector shape. For a new data-center deployment, the equipment model, port mode and software release provide the most useful basis for a pre-order review. Where supported by the host, link stability and diagnostic indications are reviewed together with the established link.

Frequently Asked Questions

Is this an original Extreme Networks cable?

No. It is an HT-manufactured compatible alternative for equipment that specifies Extreme Networks 10GB-AC10-SFPP.

Can different brands be connected with the same assembly?

Only where both hosts explicitly support the complete interface and compatibility arrangement. Document each end and select the appropriate brand-specific product when required.

Does this order code cover multiple lengths?

No. 10GB-AC10-SFPP refers here to 10m (33ft). Every other verified length has a separate part number and page in the length list.

Are separate transceivers or patch leads required?

No. This is one complete direct-attach assembly. The ends are not detachable modules and should not be separated from the cable.

Shipping and Lead Time

Available stock is generally dispatched within one to three working days after order confirmation, with production lead times advised for larger quantities. Delivery can be arranged by courier, air freight or sea freight, and goods may instead be handed to an appointed forwarder or shipped on the customer’s courier account.