10G SFP+ Passive DAC

The 10G SFP+ Passive DAC series provides 10Gbps direct-attached connectivity using SFP+ to SFP+. The assembly combines a factory-terminated twinax copper assembly without separate optical modules in one tested product. This page covers the family rather than a single length, with standard options of 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 4m (13ft), 5m (16ft), 6m (20ft), 7m (23ft) and custom project lengths available for review.

Series Part Number: SFP-10G-PCManufacturer: HT

Product Highlights

SFP+ to SFP+ direct-attached interface arrangement
Supports 10Gbps links
Standard lengths: 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 4m (13ft), 5m (16ft), 6m (20ft), 7m (23ft)
Factory-tested complete cable assemblies for enterprise, operator and data-center installations

Available Lengths

Available standard configurations include 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 4m (13ft), 5m (16ft), 6m (20ft), 7m (23ft). Select a length that follows the managed route without pulling on either connector or leaving excessive slack around airflow paths. Custom lengths can be manufactured for projects when the standard range does not match the installation.

Specifications

Series Part Number	SFP-10G-PC
Manufacturer	HT
Connector Type	SFP+ to SFP+
Max Data Rate	10Gbps
Media	Copper
Power Supply	3.3V
Minimum Bend Radius	23mm
Wire AWG	30AWG
Available Length Options	0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 4m (13ft), 5m (16ft), 6m (20ft), 7m (23ft)
Jacket Material	PVC (OFNR)
Cable Type	Passive Twinax
Temperature	0 to 70°C (32 to 158°F)
Power Consumption	≤0.1W
Application	10G Ethernet
Protocols	1x InfiniBand QDR, DDR, SDR, 10 Gigabit Ethernet, Fibre Channel

Applications and Cable Routing

This 10G DAC series can be used for suitable switch-to-switch, switch-to-server and rack interconnection requirements. Measure the actual pathway through horizontal and vertical managers before choosing a length. Keep connector boots clear of sharp edges, observe the stated bend limit and leave enough access to release each latch during maintenance.

Compatibility and Factory Testing

Compatibility depends on the host interface, operating mode and the identification required by the equipment. For brand-coded versions, provide the equipment model and OEM reference so the intended configuration can be reviewed before production. Each complete assembly is inspected at both ends and checked for link operation; optical versions also require clean, protected interfaces throughout installation.

Ordering Information

Quote the SFP-10G-PC series together with the required length, host brand, OEM reference where applicable and quantity. Mixed-length projects should use a separate order line for each configuration. Project labels and packaging can identify rack locations or endpoint assignments to make receiving and later maintenance easier.

Related Product Configuration

Additional factory information for this cable family is available on the 10G SFP+ Passive DAC configuration page. You can also compare adjacent assemblies in the 10G DAC cable collection.

Quality Assurance and Shipping

Connector condition, assembly identification and functional link behavior are checked before protective packing. Standard configurations are prepared for dispatch as quickly as stock allows, while larger or customized orders receive a confirmed production schedule. Local and international delivery options are available.

Frequently Asked Questions

Does this page represent only one cable length?

No. It describes the product series and lists the standard length options. Confirm the exact length and corresponding order reference when requesting a quotation.

Are separate transceivers required?

No. The cable and its attached interfaces form one complete direct-attached assembly and are tested together.

Can a custom length or brand-compatible version be supplied?

Yes, subject to configuration review. Provide the required length, equipment model and OEM part number so compatibility and production details can be confirmed.