800G OSFP ACxxx Active DAC Cable Flat Top

The 800G OSFP ACxxx Active DAC Cable Flat Top is a active dac (acc) direct attach copper cable with 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top), supporting 800Gbps (8x 106.25Gbps) links over a length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. It is a cost effective, low latency interconnect for InfiniBand NDR fabrics, GPU clusters and AI training networks, and complies with CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0.

Product Highlights

• 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top)
• Data rate: 800Gbps (8x 106.25Gbps)
• Cable type: Active DAC (ACC)
• Length: 1-5m (3ft-16ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

Designed for InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP ACxxx Active DAC Cable Flat Top carries 800Gbps (8x 106.25Gbps) between 800G OSFP (RHS/Flat Top) to 800G OSFP (RHS/Flat Top) interfaces. This unit is supplied at 1-5m (3ft-16ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.

Compliance: CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This model is supplied at 1-5m (3ft-16ft) under part number OSFPFL-800G-ACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.