The Arista Compatible 800G OSFP ZRPH Optical Transceiver is a hot-pluggable OSFP transceiver rated at 850Gbps (8x 106.25Gbps). Using a Duplex LC/UPC optical interface over SMF at 1528.77~1567.13nm, it covers transmission distances up to Amplified: >500km Unamplified: ≤72km. Compliance with OSFP MSA Rev5.0, IEEE 802.3-2022, OpenZR+ MSA, CMIS 5.2, together with integrated diagnostic monitoring, makes it a dependable choice for data center interconnect, metro transport and carrier aggregation networks.

Product Highlights

• OSFP form factor, 850Gbps (8x 106.25Gbps) data rate
• Wavelength: 1528.77~1567.13nm
• Connector: Duplex LC/UPC
• Reach: up to Amplified: >500km Unamplified: ≤72km
• Fiber media: SMF
• DDM/DOM: Supported

The Arista Compatible 800G OSFP ZRPH Optical Transceiver is used in data center interconnect, metro transport and carrier aggregation networks, where it provides an 850Gbps (8x 106.25Gbps) link over SMF up to Amplified: >500km Unamplified: ≤72km. With its Duplex LC/UPC optical interface, the module works directly with the SMF infrastructure already installed in most facilities. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs 8x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.

Compliance: OSFP MSA Rev5.0, IEEE 802.3-2022, OpenZR+ MSA, CMIS 5.2. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

Our part number for this module is OSFP-ZRPH-800G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.

Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.

From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.

Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.