For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This four-port MMC-to-MMC adapter places four mating positions in a single reduced-flange green plastic body. Measuring 12.9 x 17.5 x 29.6mm, it is intended for high-density MMC panels where shared mounting blocks save space and reduce the number of individual adapter installations. Fiber capacity is determined by the MMC connector type used at every port.

Product Highlights

• Connector Type: MMC-MMC
• Body Style: 4-Port
• Color: Green
• Mounting Type: Reduced Flanged
• Body Material: Plastic
• Dimensions (HxWxD): 12.9x17.5x29.6mm

Specifications

Scaling panel density with four-port blocks

Four ports in one housing allow a panel to accommodate more MMC interfaces without four distinct mounting operations. The 17.5mm body width must be matched to the proper cut-out, and front access should be checked with all four positions populated. Because MMC-12, MMC-16 and MMC-24 systems have distinct fiber maps, port count alone does not define link capacity.

Independent optical paths in a shared body

Every adapter location is a distinct mechanical mating point. The block does not join fibers between ports or offer polarity correction. Label the four positions unambiguously and document which trunk or jumper occupies every one. This is especially important when adjacent ports carry distinct fiber counts or connect to distinct destinations.

Access, cleaning and mounting verification

High density makes finger and boot clearance a practical concern. Verify that a connector may be removed without disturbing the other three links. Examine end faces before insertion, cap unused ports and avoid forcing misaligned connectors. The reduced-flange housing should be existing only in a panel intended for its mounting geometry and dimensions.

Ordering and Factory Support

Reference part number 24245 for the four-port reduced-flange adapter and offer unit count. If these blocks will populate a new enclosure, provide this panel cut-out and desired port numbering to confirm fit and identification before placing an order. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.