For UAE project teams, the key is to match this exact configuration to the port schedule, optical budget and delivery documentation. This OM4 fiber patch cable carries a LC UPC interface on one end and a LC UPC interface on the other, factory terminated on OM4 glass and optically tested as an entire unit. The duplex zipcord build keeps the transmit and receive strands paired in one unit for fast, error-free patching.

Product Highlights

• Ultra Low Loss Connector with Typical 0.08dB IL
• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Flame-Retardant Riser (OFNR) for Vertical and Floor-to-Floor Installations
• Color-Coded Cable Jacket for Easy Identification

Specifications

Why OM4 replaced OM3 in new builds

OM4 raises the effective modal bandwidth to 4700 MHz·km at 850nm, and that headroom translates directly into reach for the higher-speed interfaces. The price difference against OM3 has largely disappeared, so new cabling plants standardize on OM4 and keep OM3 only for matching installed installations.

Polarity and pairing in duplex links

A duplex jumper is two fibers with a defined A-to-B crossover. Getting polarity right at the cord level keeps the link consistent end to end, which is why these assemblies are built and tested as a pair rather than as two separate strands.

Ultra low loss for stretched budgets

Each connector pair spends part of the optical budget. Ultra low loss terminations cut the per-mated-pair insertion loss to 0.12dB typical, which buys back reach on links that sit at the edge of the specification or frees budget for an extra cassette in the link.

Length Options

Standard length options cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), with custom length offered beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off these connectors.

Quality Control and Testing

Each assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. This cable ships with dust caps on the two connectors and the test result offered on specify.

Ordering and Factory Support

Refer to this setup by connector pair, fiber mode and length when ordering a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the need with the inquiry and the factory will verify the build prior to production. Our UAE project support can review the requirement with Shenzhen production before a formal quotation is issued.