One MTP®-16 Female with Offset Key harness replaces a cassette, two patch cords and the loss that comes with them. OS2 9/125μm fiber and Plenum (OFNP) jacket, built and tested end to end in our own facility.

Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.

Product Highlights

• MTP®-16 Female (Non-Pinned) with Offset Key to LC Duplex, 16 Fibers
• OS2 9/125μm, G.657.A1
• Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥60dB
• Crossover polarity
• 3.0mm Plenum (OFNP) round cable
• Minimum bend radius 10mm
• Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order

Typical uses include connecting a parallel optics port to multiple duplex LC ports, wiring between an MPO backbone and LC equipped switches or servers, and neat fan-out at the equipment rack. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes.

The duplex LC legs are manufactured to a uniform breakout length and labeled in sequence, so each pair lands on the intended port. Uniboot and standard duplex LC options are available, and leg length can be adjusted for your rack layout.

Ordering is simple: send us 16FMTPLCSMF and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.

Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.

Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.

Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.